Blanket Family safe PREMIUM 2.1 / m2
Blanket Family safe PREMIUM 2.1 / m2
Blanket Family safe PREMIUM 2.1 / m2
Blanket Family safe PREMIUM 2.1 / m2
Covers

Blanket Family safe PREMIUM 2.1 / m2

Code: 2944788

High-quality safety cover for pools up to 12x5.5m in size. 

Price
64,95 €
The price includes VAT (25%).

Delivery is not included in the price.

Product on request

Contact us at +385 99 333 4023
or write to us at [email protected]

About the product
Documents
About the product

High-quality safety cover for pools up to 12x5.5m in size. The blanket is made of high-quality polyester canvas 580g/m2 with a high-frequency welding process, which is coated with PVC on both sides and varnished. It has a long service life. It does not transmit light and is resistant to UV rays and water care products. Drainage openings are made in the cover, which are almost invisible.

The cover is supported along its length by aluminum rods, which are finished at the ends with aesthetic gray PVC caps. A patented system of 3 straps and stainless steel tensioners is used to tighten the cover. The cover is also so-called "anti-lift" - it prevents the cover from lifting due to the wind. For this purpose, along the length of the cover, a strip is installed in the hem on both sides of the cover, which is tightened by a patented stainless steel tensioner system.

Key advantages:

  • Due to the additional tensioners, even a strong wind cannot blow the cover off the pool.
  • PVC protection installed under the bars protects against edge friction.
  • The straps are the same color as the tensioner.

 

The cover contains everything necessary to attach it to the edge of the pool and a reducer for winding. The cover is usually 25 cm larger than the internal dimensions of the pool at each level (0.5 m width and length). The cover is attached (with anchors) to both shorter sides of the pool. It is necessary to provide a hard concrete base approx. 55 cm from the inner edge of the pool on both shorter sides for attaching the anchors. The cover can be used throughout the year.*

  • Installation is not included in the price of the cover.
  • The foundation for anchors for tensioners is provided by the investor (concrete foundation on the shorter sides of the pool at a distance of approx. 55 cm from the inner edge of the pool).

 

The cover is available in the following colors:

  • beige, blue, light gray, dark gray, green (bottom side is beige)
  • st. gray mat (the bottom side is gray)

 

Warranty: 3 years

For blankets less than 25 m2, the surcharge is 20%.

* If the cover is also used in winter, it is mandatory to constantly clean the falling snow from the cover or install additional supports.

* In case of strong gusts of wind, carefully tidy up the cover or roll it up on one side of the pool or additionally weigh it around the entire perimeter.

* The supplier's warranty is not valid in case of damage to the cover due to wind or snow load, because it is damage caused by force majeure.

Automated robotic cleaners are very effective in removing dirt, algae and debris from the bottom and walls of the pool, which helps maintain better water quality.

By regularly using the filter cleaner, you extend its life and thus extend the life of the hot tub.

Balancing the pH of the water is essential for keeping the pool clean and preventing corrosion of the equipment.

<
>