Optimal chemical dosing for perfectly clean water

Optimal chemical dosing for perfectly clean water:

• Water pH: Should be between 7.2 and 7.6.
• Chlorine Level: Maintain between 1-3 mg/L.
• Water Hardness: Recommended range is 150-300 mg/L.
• Alkalinity: Optimal is between 80-120 mg/L.

Simple tips:

• Check water parameters regularly at least twice a week during the season.
• Always add chemicals according to the manufacturer's instructions.
• Avoid excessive dosing and large fluctuations in parameters.

​​​​​​​

Guidelines for optimal chemical dosage:

• Always use appropriate tools to accurately measure chemicals to avoid overdosing.
• Add chemicals gradually, allowing them to distribute evenly throughout the water before retesting parameters.
• Avoid mixing different chemicals immediately before adding to the pool to prevent unwanted reactions.
• Check local guidelines for safe storage and handling of chemicals to ensure long-term safety.

Advantages of automatic dosing with Dinotec:

• Continuous control of pH and disinfection.
• Reduced consumption of chemicals thanks to precise dosing.
• Possibility of integration with filtration and remote control.

For more information on automated maintenance systems, see the Dinotec product offering.

Procedure for perfectly clean water:

1. Check key parameters: Measure water quality regularly.
2. Small dose correction: Gradually balance chemical levels.
3. Automate: Systems like Dinotec simplify pool maintenance.

Additional tips:

• After rain or heavy use of the pool, perform a chlorine shock treatment.
• Monitor the impact of weather conditions on water quality.
• Use additional cleaning equipment, such as robotic pool cleaners.

By following these basic guidelines and using quality products, you can ensure that your pool water is maintained perfectly clean with minimal effort.