
Granules for lowering the pH value of swimming pool water.
Granulate for lowering the pH value of pool water. It reduces the pH value of the pool water from the basic to the neutral range between 7.0 and 7.6.
The ideal pH value of water is 7.0-7.6. The ideal value of chlorine is 1-3mg/L. Make sure that the chlorine value and pH are always within ideal parameters.
Use the provided chlorine and pH meters for measurement.
Usage:
150 g of pH minus granulate is enough for 10 m3, it lowers the value by approximately 0.2. With hard water, a larger dosage is required, with soft water, less. Check the pH value between doses.
You should adjust the recommended dosage in the instructions for use to the measured values.
Do not add the agent near metal parts. Dissolve the granulate in a bucket of water and then slowly pour it along the edge of the pool water.
To clean scale deposits, dissolve approximately 200 g of pH minus granules in 2 liters of water,
Apply to the surface and leave to act, then rinse with water.
Never mix the agents with other chemicals! In case you use several different agents for water care, prepare a solution of each in its own container and then carefully pour it along the edge of the pool.
Follow the safety instructions. Avoid contact with eyes or skin.
Wear protective gloves when working.